Jeti assist gyro eingestellt, aber am flugzeug keine gyro korrektionen

DirkSchipper wrote: Problem solved: When flying with a Central Box (servos on the CB and not the receiver), a 'hidden' option should be selectable.
The gyro/assist now works.

But... new problem: fail-save no longer works.
Fail-save on the receiver should be off, but not on the CB. But (even after resetting it) nothing happens when I switch off the transmitter.
The receiver only has the "intelligent-stabilized" option.
What I want:
- spoilers 50% extended
- flaps 50% down
- rudder 20% to one side
- flight gyro stabilized.

Is this possible? Yes, how?

Regards, Dirk

Knut wrote: Hi Dirk,

I can tell you how the Assist works. 
The internal failsafe position is set in the receiver using "set sensor trim now."
This means you set all the functions as desired, flaps, etc. Then you align the aircraft according to the desired flight path, but not more than 12° per axis. Gliders should, of course, follow a downward-sloping flight path. The Assist is set to 0° in this case. Then you activate "sensor trim now." In a failsafe situation, this means the flaps/rudders will move as desired, and the model will be stabilized in a hover hold mode. The rudder remains in damping mode.
Others will surely know how this works in conjunction with a CB (combination sensor).

I would disable hover hold initially, or generally, and use the horizon instead. However, there is a way to still use hover hold effectively, even for takeoff and landing.

Bye,
Knut